Filter
Top Products
Chapter 3: Operations 51
-or-
Click Cancel to
exit the OSCAR interface without saving changes
5. If you connected a Pinnacle FAK keyboard, complete the following steps:
a. Click the Admin tab
.
b. Select the target device that will
be running software that requires Pinnacle FAK support.
c. Click Edit device.
d. Select Pinnacle FAK from
the Emulation drop-down menu. You can only edit the
emulation mode if the device-type is PS/2. (If you are using a Chyron Duet keyboard, the
Emulation mode should be Standard.)
6. To save changes, click Apply. T
o exit the OSCAR interface, click Cancel or X.
Keyboard translation
The AMX user station allows you to use PS/2 or USB keyboards to operate any type of attached
target device. However, when crossing platforms, certain keys will need to be remapped in order to
provide all of the functions available on the keyboard native to that platform.
For example, if you access a Sun workstation with a PS/2
keyboard, you will notice that the PS/2
keyboard does not have the
Stop and Again keys that are on a true Sun keyboard. By enabling the
Scroll Lock mode by pressing
Ctrl-Alt-Shift and Scroll Lock at the same time, the F1 and F2 keys
on the PS/2 keyboard function as the Sun
Stop and Again keys. With Scroll Lock mode disabled,
F1 and F2 function normally.
NOTE: The Scroll Lock LED blinks if the mode is enabled.
Table 3.3 shows the translations for a PS/2 keyboard to a Sun server. All mapped functions will
only be valid when the Scroll Lock mode is enabled.
Table 3.3: PS/2 Keyboard to Sun Server
Key Sun Key Sun
F1 Stop F9 Find
F2 Again F10 Cut
F3 Props F11 Power
F4 Undo F12 Command
F5 Front keypad * Compose
F6 Copy NUMLOCK Help
F7 Open keyboard / Mute
F8 Paste keyboard - Vol -
F8 Paste keyboard + Vol +
AMX.book Page 51 Thursday, June 12, 2008 4:14 PM