Filter
Top Products
60 AMX Switch Series Installer/User Guide
• PS/2 Dual-Port
• SUN Dual-Port
•USB Dual-Port
• Serial Single-Port
• MDM target device
5. Type a new name (1-15 characters) for the device in the Name field.
6. If the device is an AMIQ-USB/AMIQDM-USB module or AMIQ-VSN/AMIQDM-VSN
modul
e, select a keyboard country layout, shown in Table 3.1 on page 48, from the Layout
drop-down list. For all other devices, this field is disabled.
7. If the device is an AMIQ-USB/AMIQDM-USB module or AMIQ-VSN/AMIQDM-VSN
modul
e, select the emulation setting for the device from the Emulation drop-down list. For all
other devices, the field is disabled.
8. To save changes and return to the Device Admin screen, click Apply. T
o exit the OSCAR
interface, click Cancel or X.
To edit a device (seamless configuration):
1. Press
Ctrl+Ctrl to launch the OSCAR interface.
2. Click the Admin tab. The Device Admin screen displays.
NOTE: The Device Admin screen will display only the devices that are currently attached to the switching system
and powered. Only the Administrator can edit device attributes.
3. From the drop-down list, select the device you wish to edit.
4. Click the Edit Devi
ce button. The Edit Device screen displays.
5. Type a new name (1-15 characters) for the device in the Name field.
From the Target drop-down list, select the cascaded Avocen
t KVM switch to which the IQ
module is attached.
- or -
Select KVM Switch if the cascaded switch
is a non-Avocent switch.
AMX.book Page 60 Thursday, June 12, 2008 4:14 PM