Filter
Top Products
4-7
Connections
5976072 BARCOELM R12 05052000
S-VIDEO
98 27900
VIDEO
LR
AUDIO
On On
Video/S-video Input Module
What can be connected to the Video input ?
Composite video signals from a VCR, OFF air signal decoder, etc...
What can be connected to the S-Video input ?
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals.
Video input
Audio input not
available
S-Video input
Possible indication :
RGB-SS [CS or HS&VS] = RGB analog signals, separate sync is composite sync or horizontal and vertical sync.
RGB-SS [3LSS or CV] = RGB analog signals, separate sync is composite tri-level sync or composite video.
RGB-SOG [SOG or 3LSOG] = RGB analog signals, sync on green is composite sync or composite tri-level sync.
COMPONENT VIDEO - SS [SS or 3LSS]
= separate sync is composite sync or composite tri-level sync.
COMPONENT VIDEO - SOY [SOY or 3LSOY]
= component video with composite sync on Y or composite tri-level sync on Y.
VIDEO
S-VIDEO
Note for RCVDS05 users.
When using an RCVDS 05 with a 5 cable output module, connect these 5 cables to this fixed 5-input slot (slot2) of the projector.
All sources of the RCVDS can now be accepted by the projector.
R
G
B
H / C
V
On
98 27 910
RGB
H / C
V
On
Hig h Ba nd wid t h R GB ANALOG INPUT
R
G
BH / C V
On
Hig h Ba ndwi d t h 5 CABLE I NPUT
OUT IN
On
9840 110
OUT IN
On
9840 110
COMM PORT TRIGGER OUT
RS232/422 OUTRS232/422 IN
IR-ReceiverDiagnostic Code
Gre en Op er atio n
Red Stand-by
IRSy nc OK
Hardwired
remote
CTRL 1
Har dwir ed
re mo t e
CTRL 2
Two way
hardwired
remote
CTRL 3
TV tuner, e.g.
Marco Polo
Audio amplifier
Composite
Video
VCR S-VHS
Luma/Chroma
1 x BNC 1.0Vpp ± 3 dB
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
How to select :
Key in the corresponding slot number on the RCU or the local keypad. Depending on the priority setting in the Input slots menu, Video
or S-Video will be displayed.