Filter
Top Products
4-9
Connections
5976072 BARCOELM R12 05052000
R
G
B
H / C
V
On
98 27910
Vert. sync
Hor. sync or Composite
sync
Blue
Green
Red
RGB Analog Input Module.
What can be connected to these inputs ?
RGB analog input terminals with separate Horizontal and
Vertical sync inputs(RGB-HV), with Composite sync
input(RGB-S) or with Sync signals on green(RGsB).
Remark
Always use an interface when a computer and local monitor
have to be connected to the projector. See 'slot 1' for
interfaces to be applied.
All input signals are always 75 ohm terminated, even in the "not selected" mode.
How to select the RGB input :
Key in the corresponding slot number on the RCU or the local keypad.
Sync selection on the Input Slots menu.
The horizontal sync input can be set as separate sync input or as separate sync + video input.
To change this setting :
1 Press ADJUST or ENTER key to start up the Adjustment mode.
2 Push the cursor key é or ê to select Installation (menu 1)
3 Press ENTER.
4 Push the cursor key é or ê to select Input Slots (menu 2)
5 Press ENTER.
6 Push the cursor key é or ê to select the corresponding RGB Input Slots (menu 3)
7 Press ENTER key to toggle between CV and CS or HS&VS.
RGB
H / C
V
On
98 27 910
R
G
BH / C V
On
Hi gh B an d wid t h RGB ANALOG INPUT
RGB
H / C
V
On
High Bandwidth 5 CABLE INPUT
OUT IN
On
9840 11 0
OUT IN
On
9840 11 0
COMM PORT TRIGGE R OUTRS232/422 OUT
RS232/422 IN
IR - R ec eive rDiagnostic Code
Green O peration
Re d Stand- by
IRSy nc OK
Hardwired
remote
CTRL 1
Hardwired
remote
CTRL 2
Two way
hardwired
remote
CTRL 3
RGBS/RGsB analog : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if sync on green
Vert. sync : 1 Vpp to 4 Vpp ± 3 dB
Hor. sync / Composite sync :
1 Vpp to 4 Vpp ± 3 dB