Belkin 5232K Switch User Manual


 
13
OmniViewIP 5216K/5232K
SECTIONSTable of Contents 1 3 4 5
6
2
INSTALLATION
Setting the IP Address
By default, the Switch boots with an automatically assigned IP address
from a DHCP (Dynamic Host Configuration Protocol) server on the
network. The DHCP server provides a valid IP address, gateway
address, and subnet mask.
You can identify the IP address from the OSD at the local position. You
can set the IP address locally via the OSD where there is no DHCP
server as follows:
1. From the local keyboard, press “Scroll Lock”. The OSD Main
window appears (see Figure 10).
2. Press “F2”. The Settings window appears (see Figure 11).
In the Settings window, navigate downward using the Tab key. At the
bottom of the window, press “Tab” to go to the top of the window.
Change settings by typing in the selected area or by pressing the space
bar—whicheverisrelevant.
Figure 10 OSD Main window
Figure 11 Settings window