Belkin 5232K Switch User Manual


  Open as PDF
of 57
 
14
OmniViewIP 5216K/5232K
SECTIONSTable of Contents 1 3 4 5
6
2
INSTALLATION
Changing the network parameters
Enable DHCP – When a DHCP server is active on the same network to
which the Switch is connected, DHCP provides automatic IP assignment.
WhenDHCPisdisabled(Recommended)–YoucanassignafixedIP
address to the Switch.
Consult your network administrator regarding the use of the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and
Gateway as given by your network administrator.
Once the IP address is satisfactory, log in to the web interface to
completetheconfiguration,asexplainedinthenextsection.
(Network parameters can also be changed from the remote GUI as
explainedonpage17).
 previous next