Filter
Top Products
38
OmniViewIP 5216K/5232K
SECTIONSTable of Contents 1 2 3 5
6
4
REMOTE ACCESS
Calibrating mice pointers
A target server may have a different mouse pointer speed to the client
computer. Calibrating automatically discovers the mouse speed of the
target server and aligns the two pointers.
To perform the calibration when the target server’s operating system is
Windows NT
®
4, 2000, or 98:
From the toolbar, click “ / Calibrate”. The Switch saves this
alignment so calibration is only needed once per target server.
If the video noise level is above zero, calibration may not work. Go to
“Video Adjustment” and try to eliminate the noise by pressing “Auto
video adjust” and/or adjusting the bars in manual video adjust. Then
perform the mouse calibration.
Note! If the mouse settings on the target server were ever changed, you
mustsynchronizemousepointersmanually,asexplainedbelow.
Adjustments in general
The above adjustments, namely:
• Performance settings
• Video settings
• Keyboard key sequences
• Synchronizing mouse pointers
may have to be performed twice for each target.