Belkin 5232K Switch User Manual


 
37
OmniViewIP 5216K/5232K
SECTIONSTable of Contents 1 2 3 5
6
4
REMOTE ACCESS
Advanced – Mouse emulation
Click andthe“MouseEmulation”dialogboxappears(see
Figure 33).
Figure33MouseEmulationdialogbox
Figure34MouseEmulationdialogboxforusewithtouchpads
Press “OK” to save settings.
Note:
This “Mouse Emulation” setting is used to determine the correct reset
sequence for a local mouse. Setting it incorrectly may lead to a jumpy or
non-operational local console mouse after a remote user disconnects it
from the Switch.
Max Rate-Thisdefinesthemaximummousereportrate.ForSun
Solaris, the default value is 20 in order to support older Sun versions.
If a 2-button mouse (older mice without wheel capability, most of the
touch pads, trackballs, or integrated keyboards with mice used in most
of the rack drawers) is connected to the local KVM port of the Switch,
set the “Mouse Emulation” to “Standard Mouse” (see Figure 34).