Belkin 5232K Switch User Manual


 
16
OmniViewIP 5216K/5232K
SECTIONSTable of Contents 1 2 4 5
6
3
WEB INTERFACE
Logging in
To complete the initial setup via the web configuration interface:
1. Openyourwebbrowser(InternetExplorerversion6.0orhigher).
2. TypetheSwitch’ssystemIPaddress—httporhttps://IPaddress/-
and press “Enter”. The login page appears (see Figure 13).
Figure 13 Login page
3. Type the default administrator user name (admin) and password
(SMBremote) (case-sensitive).
4. Press “Enter”. The web interface opens at the Targets page (see
Figure 14).
5. Bookmark the page for easy reference.
Figure 14 Targets page
By default, an administrator can access all connected Targets, so they
all appear on the Targets page.
Columns:
Server Name – The server name can be changed in the configuration
settings to give the server an identifiable name.
Port Status – Port status can be on, off, or busy (i.e., another user is
accessing the server).
Current User – The current user (if any) who is accessing the target.