Belkin 5232K Switch User Manual


  Open as PDF
of 57
 
32
OmniViewIP 5216K/5232K
SECTIONSTable of Contents 1 2 3 5
6
4
REMOTE ACCESS
Auto video adjust
To adjust the video automatically:
Click “Auto Video Adjust”. The process takes a few seconds. If the
process runs for more than three times, there is an abnormal noise level.
Check the video cable and verify that no dynamic video application is
running on the target server’s desktop.
Perform the procedure where necessary for each target server or new
screen resolution.
Keyboard key sequences
Click . A list of defined keyboard sequences appears. When
clicked, these transmit directly to the target server, and will not affect
the client computer.
Forexample,select“Ctrl-Alt-Del”tosendthis3-keysequencetothe
target server to initiate its shutdown/login process.
To add a keyboard sequence:
Click“Add/Remove”.TheSpecialKeyManagerboxappears(see
Figure 30).
To add a predefined sequence:
1. Click “Add Predefined”. A list of sequences appears.
2. Select the desired sequence and click “OK”. The sequence
appearsintheSpecialKeyManagerbox.
3. Click “OK”. The sequence appears in the Keyboard Key
sequence list.
Figure30SpecialKeyManagerbox
 previous next