Filter
Top Products
15
INSTALLATIONINSTALLATION
14
Example:
Four OmniView ENTERPRISE Quad-Bus Series KVM Switches (F1DE208C) are
daisy-chained together to control 32 computers. The DIP switch on the primary units
are set to “BANK Address 00” and the secondary units are each set to a unique BANK
address between 01 and 15 (BANK 00 needs to be configured for daisy-chain operation,
as noted above).
Installation
Before you begin:
1. Make sure that all computers and switches are powered off and that each Switch
has been assigned a unique BANK address.
2. Place primary and secondary Switches in the desired locations.
3. Connect the console monitor, keyboard, and mouse to the console ports of the primary
Switch(es), as previously described for standalone units, skipping steps 5 and 6.*
*Dual-console support available on 2x8 and 2x16 models only.
4. Connect the computers to the Switch as previously described for standalone Switches.
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
Hosts 1 & 2 Hosts 3 & 4 Hosts 5 & 6 Hosts 7 & 8
DIP Switch Configuration Chart
N° DU COMMUTATEUR DIP
ADRESSE BANK
12 34
BAS BAS BAS BAS
BANK 00 (valeur par défaut)
HAUT BAS BAS BAS BANK 01 PRIMAIRE/SECONDAIRE
BASHAUTBAS BAS BANK 02 SECONDAIRE
HAUT HAUT BAS BAS BANK 03 SECONDAIRE
BASBAS HAUT BAS BANK 04 SECONDAIRE
HAUT BAS HAUT BAS BANK 05 SECONDAIRE
BASHAUTHAUTBAS BANK 06 SECONDAIRE
HAUT HAUT HAUT BAS BANK 07 SECONDAIRE
BASBAS BAS HAUT BANK 08 SECONDAIRE
HAUT BAS BAS HAUT BANK 09 SECONDAIRE
BASHAUTBAS HAUT BANK 10 SECONDAIRE
HAUT HAUT BAS HAUT BANK 11 SECONDAIRE
BASBAS HAUT HAUT BANK 12 SECONDAIRE
HAUT BAS HAUT HAUT BANK 13 SECONDAIRE
BASHAUTHAUTHAUTBANK 14 SECONDAIRE
HAUT HAUT HAUT HAUT BANK 15 SECONDAIRE
P74290ea_F1DExxxC_man.qxd 30-10-2003 11:20 Page 14