Filter
Top Products
34 35
USING YOUR SWITCHUSING YOUR SWITCH
To start the update process, you must run the AutoUpdate application by selecting
“AutoUpdate.exe” from the start menu, or a desktop shortcut.
The first screen of the AutoUpdate application will prompt the user to select an
automatic or manual update. You should generally select automatic, unless you have
a specific reason to do otherwise. An automatic update will check the firmware on
the Switch and compare the versions installed against the latest versions available;
if there are newer versions, the application will download the new firmware from the
Internet and transfer it into the Switch. Then the user needs to power-cycle the KVM
Switch(es), to complete the firmware installation. The manual update works similarly,
but the user needs to acquire the correct update file manually.
Note: Before updating the Switch, make sure that AutoScan is off and the OSD is not
displayed on the console. This will reduce the level of extraneous activity in
the Switch.
The AutoUpdate Firmware Update Utility
Updating Firmware
The AutoUpdate application is designed to inspect your hardware and guide you
through the process of updating the firmware (if necessary) on your Switch.
AutoUpdate automatically downloads the best firmware for your device from the
Belkin website, or you can download the appropriate file manually by going to our
website at belkin.com.
The administrator should perform the updates when the KVM Switch(es) is not in
use. Each Switch will be power-cycled during the process, which may lead to loss of
keyboard, or mouse functionality on some computers. The administrator should shut
down any computers that he or she is not willing to physically reset, before
beginning the update process.
To update the firmware, you will need the following items:
1. A computer running Windows XP, 2000, Me, or 98, with an available USB port.
2. A standard USB cable that connects between the Switch and the computer.
3. The Belkin AutoUpdate application that can be downloaded from the Internet.
4. An Internet connection for automatic installation.
Installing the AutoUpdate application:
1. Download and run the AutoUpdate application from the Belkin website.
2. Click the “Next” buttons, configuring file locations, icon preferences, etc., as
desired, until the install is complete.
Connecting the computer to the Switch:
1. Power on the Switch.
2. Connect one end of the USB cable to the flash port on your Switch(es) (the USB
“B” connector) and the other end to the computer’s USB port(s). You may need
one or more USB hubs between the computer and the Switch if you intend to
update multiple Switches simultaneously.
Note: Before you begin the update, the administrator should go into the Options page in
the OSD, press the “Display Version Numbers” button, and record the current version
numbers; this will allow the administrator to confirm that the firmware was
updated correctly.
P74290ea_F1DExxxC_man.qxd 30-10-2003 11:20 Page 34