Belkin N1 Network Router User Manual


 
1514
1514
Connecting and Configuring your N1 Vision
section
1
9
2
3
4
5
6
7
8
10
Step 1
Hardware Connections – Follow the Quick Installation
Guide (QIG)
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
2
3
4
7
5
6
1
LAN
WAN
modem router back of computer WWW
routersetup
2
3
4
6
7
existing cable
new cable from package
5
2
3
4














1. Plug the power supply into the wall outlet.
2. Plug the other end into the black port on the N1 Vision.
3. Find the cable connecting the modem and computer**. Unplug
it from the computer and plug it into the yellow port on the
N1 Vision.
**If you are replacing an existing router, find the cable connecting
the modem and old router. Disconnect it from the old router and
plug it into the yellow port on your Belkin N1 Vision.
4. Connect the new cable (provided in the box) to any gray port on
the N1 Vision.
5. Connect the other end of that cable to a networking (Ethernet)
port on your computer.
6. Rotate the antennas up.
7. Open a web browser on that computer. The Belkin Router Setup Wizard
should appear automatically. If it doesn’t, enter “routersetup” into the
web-address field and press the “Enter” key.