Filter
Top Products
4544
Alternate Setup Method
4544
Configuring your WAN Media Access Controller (MAC) Address
All network components including cards, adapters, and routers, have
a unique “serial number” called a MAC address. Your Internet Service
Provider (ISP) may record the MAC address of your computer’s adapter
and only let that particular computer connect to the Internet service.
When you install the N1 Vision, its own MAC address will be “seen” by
the ISP and may cause the connection not to work. Belkin has provided
the ability to clone (copy) the MAC address of the computer into the N1
Vision. This MAC address, in turn, will be seen by the ISP’s system as
the original MAC address and will allow the connection to work. If you
are not sure whether your ISP needs to see the original MAC address,
simply clone the MAC address of the computer that was originally
connected to the modem. Cloning the address will not cause any
problems with your network.
Cloning your MAC Address
To clone your MAC address, make sure that you are using the computer
that was ORIGINALLY CONNECTED to your modem before the N1 Vision
was installed. Click the “Clone” button (1). Click “Apply Changes” (3).
Your MAC address is now cloned to the N1 Vision.
Entering a Specific MAC Address
In certain circumstances you may need a specific WAN MAC address.
You can manually enter one in the “MAC Address” page. Type in a
MAC address in the spaces provided
(2) and click “Apply Changes” (3)
to save the changes. The N1 Vision’s WAN MAC address will now be
changed to the MAC address you specified.
(1)
(3)
(2)