Filter
Top Products
2524
Connecting and Configuring your N1 Vision
2524
Troubleshooting Assistant CD
Belkin has provided our Assistant software to make installing your
N1 Vision a simple and easy task. You can use it to get your N1
Vision up and running in minutes. The Assistant software requires
that your Windows 2000, XP, or Vista computer be connected
directly to your cable or DSL modem and that the Internet
connection is active and working at the time of installation. If it
is not, you must use the “Alternate Setup Method” section in this
User Manual to configure your N1 Vision. Additionally, if you are
using an operating system other than Windows 2000, XP, or Vista,
you must set up the N1 Vision using the “Alternate Setup Method”
section in this User Manual.
A. Shut down any programs that are running on your computer
at this time.
Turn off any firewall or Internet-connection-sharing software on
your computer.
B. Insert the CD into your computer. The Troubleshooting Assistant
will automatically appear on your computer’s screen within 15
seconds. Click on “Go” to run the Troubleshooting Assistant.
Follow the instructions there.
IMPORTANT: Run the Troubleshooting Assistant from the computer
that is directly connected to the Router from Step 1 – B.