Filter
Top Products
9392
Troubleshooting
9392
• The Assistant software completed installation, but my web
browser doesn’t work.
• I am unable to connect to the Internet. The “modem” icon on
my N1 Vision is blinking, and the “internet” icon is blinking.
If you cannot connect to the Internet, and the “modem” icon is
blinking, and the “internet” icon is blinking, the problem may be that
your modem and N1 Vision are not connected properly.
1. Make sure the network cable between the modem and the N1
Vision is connected. The cable should be connected at one end
to the N1 Vision’s “to Modem” port, and at the other end to the
network port on your modem.
2. Unplug the cable or DSL modem from its power source for
three minutes. After three minutes, plug the modem back into its
power source. This may force the modem to properly recognize
the N1 Vision.
3. Unplug the power to your N1 Vision, wait 10 seconds, and then
reconnect the power. This will cause the N1 Vision to reattempt
communication with the modem. If the “modem” icon on the
N1 Vision is not lit after completing these steps, please contact
Belkin Technical Support.
4. Try shutting down and restarting your computer.