Filter
Top Products
7978
7978
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
Changing System Settings
The “System Settings” page is where you can enter a new
administrator password, set the time zone, enable remote
management, and turn on and off the NAT function of the N1 Vision.
Setting or Changing the Administrator Password
The N1 Vision ships with NO password entered. If you wish to add
a password for greater security, you can set a password here.
Write down your password and keep it in a safe place, as you will
need it if you need to log into the N1 Vision in the future. It is also
recommended that you set a password if you plan to use the remote
management feature of your N1 Vision.
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the N1 Vision’s advanced setup interface. The timer
starts when there has been no activity. For example, imagine you have
made some changes in the advanced setup interface, then left your
computer alone without clicking “Logout”. Assuming the time-out is
set to 10 minutes, 10 minutes after you leave, the login session will
expire. You will have to log into the N1 Vision again to make any more
changes. The login time-out option is for security purposes and the
default is set to 10 minutes.
Note: Only one computer can be logged into the N1 Vision’s advanced
setup interface at one time.