Filter
Top Products
8180
8180
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
Advanced Feature: The “Remote Access Port” option allows you to
configure the desired “Remote Access Port for Remote Management”
feature. The default access port is set to port 80.
Enabling/Disabling NAT (Network Address Translation)
Note: This advanced feature should be employed by advanced
users only.
Before enabling this function, MAKE SURE YOU HAVE SET THE
ADMINISTRATOR PASSWORD. Network Address Translation (NAT)
is the method by which the N1 Vision shares the single IP address
assigned by your ISP with the other computers on your network.
This function should only be used if your ISP assigns you multiple
IP addresses or you need NAT disabled for an advanced system
configuration. If you have a single IP address and you turn NAT off,
the computers on your network will not be able to access the Internet.
Other problems may also occur. Turning off NAT will not affect your
firewall functions.