Filter
Top Products
Connection22
Connecting an S-Video/Composite Video source device
Connecting an S-Video/Composite Video source deviceConnecting an S-Video/Composite Video source device
Connecting an S-Video/Composite Video source device
Examine your video source device to determine if it has an unused S-Video/Video output
jack available:
• If it has both jacks, use the S-Video output jack for connection as the S-Video terminal
provides better picture quality than the Video terminal.
• If it has either of the output jack, you can also continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to an S-Video/Video source device:
To connect the projector to an S-Video/Video source device:To connect the projector to an S-Video/Video source device:
To connect the projector to an S-Video/Video source device:
1. Take an S-Video/Video cable and connect one end to the S-Video/Video output jack of
the Video source device.
2. Connect the other end of the S-Video/Video cable to the S-VIDEO
S-VIDEOS-VIDEO
S-VIDEO/VIDEO
VIDEOVIDEO
VIDEO jack on the
projector.
3. If you wish to make use of the projector (mixed mono) speakers in your presentations,
take a suitable audio cable and connect one end of the cable to the audio output jack of
the device, and the other end to the AUDIO
AUDIOAUDIO
AUDIO or AUDIO (L/R)
AUDIO (L/R)AUDIO (L/R)
AUDIO (L/R) jack of the projector.
4. If you wish and the AUDIO OUT
AUDIO OUTAUDIO OUT
AUDIO OUT jack is available on your projector, you can use
another suitable audio cable and connect one end of the cable to the AUDIO OUT
AUDIO OUTAUDIO OUT
AUDIO OUT
jack of the projector, and the other end to your external speakers (not supplied).
Once connected, the audio can be controlled by the projector On-Screen Display
(OSD) menus. See "Audio Settings" on page 50 for details.
• The projector is only capable of playing mixed mono audio, even if a stereo audio input is
connected. See "Connecting audio" on page 20 for details.
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source device is turned on and
operating correctly. Also check that the signal cables have been connected correctly.