Filter
Top Products
Maintenance58
12. Connect the power and restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
Resetting the lamp timerResetting the lamp timer
Resetting the lamp timer
13. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM
SYSTEM SYSTEM
SYSTEM
SETUP: Advanced
SETUP: AdvancedSETUP: Advanced
SETUP: Advanced > Lamp Settings
Lamp SettingsLamp Settings
Lamp Settings menu. Press Mode/Enter
Mode/EnterMode/Enter
Mode/Enter. The Lamp Settings
Lamp SettingsLamp Settings
Lamp Settings page
displays. Highlight Reset lamp timer
Reset lamp timerReset lamp timer
Reset lamp timer. A warning message displays asking if you want to
reset the lamp timer. Highlight Reset
ResetReset
Reset and press Mode/Enter
Mode/EnterMode/Enter
Mode/Enter. The lamp time will be
reset to “0”.
Do not reset if the lamp is not new or replaced as this could cause damage.
11. Tighten the screws that secure the lamp cover.
• Loose screw may cause a bad connection, which
could result in malfunction.
• Do not over tighten the screw.