Filter
Top Products
Important safety instructions 3
Important safety instructions
Important safety instructionsImportant safety instructions
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that you
follow the instructions mentioned in this manual and marked on the product.
Safety Instructions
1. Please read this manual before you
Please read this manual before you Please read this manual before you
Please read this manual before you
operate your projector.
operate your projector. operate your projector.
operate your projector. Save it for
future reference.
2. Do not look straight at the projector
Do not look straight at the projector Do not look straight at the projector
Do not look straight at the projector
lens during operation.
lens during operation.lens during operation.
lens during operation. The intense
light beam may damage your eyes.
3. Refer servicing to qualified service
Refer servicing to qualified service Refer servicing to qualified service
Refer servicing to qualified service
personnel.
personnel.personnel.
personnel.
4. Always open the lens shutter or
Always open the lens shutter or Always open the lens shutter or
Always open the lens shutter or
remove the lens cap when the
remove the lens cap when the remove the lens cap when the
remove the lens cap when the
projector lamp is on.
projector lamp is on.projector lamp is on.
projector lamp is on.
5. In some countries, the line voltage is
NOT stable. This projector is designed
to operate safely within a mains
voltage between 100 to 240 volts AC,
but could fail if power cuts or surges
of ±10 volts occur. In areas where the
In areas where the In areas where the
In areas where the
mains voltage may fluctuate or cut
mains voltage may fluctuate or cut mains voltage may fluctuate or cut
mains voltage may fluctuate or cut
out, it is recommended that you
out, it is recommended that you out, it is recommended that you
out, it is recommended that you
connect your projector through a
connect your projector through a connect your projector through a
connect your projector through a
power stabilizer, surge protector or
power stabilizer, surge protector or power stabilizer, surge protector or
power stabilizer, surge protector or
uninterruptible power supply (UPS).
uninterruptible power supply (UPS). uninterruptible power supply (UPS).
uninterruptible power supply (UPS).
6. Do not block the projection lens with
any objects when the projector is
under operation as this could cause
the objects to become heated and
deformed or even cause a fire. To
temporarily turn off the lamp, press
BLANK
BLANKBLANK
BLANK on the projector or remote
control.