Filter
Top Products
Operation 43
Shutting down the projector
Shutting down the projectorShutting down the projector
Shutting down the projector
1. Press Power
PowerPower
Power and a confirmation message will
display prompting you.
If you don't respond in a few seconds, the
message will disappear.
2. Press Power
PowerPower
Power a second time. The POWER
POWER POWER
POWER
indicator light
indicator lightindicator light
indicator light flashes orange, the projection lamp
shuts down, and the fans will continue to run for
approximately 90 seconds to cool down the
projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process.
To shorten the cooling time, you can also activate the Quick cooling function. See "Quick
Cooling" on page 50 for details.
3. Once the cooling process finishes, a "Power Off Ring
Power Off Ring Power Off Ring
Power Off Ring
To n e
To n eTo n e
Tone" will be heard. The POWER indicator light
POWER indicator lightPOWER indicator light
POWER indicator light is a
steady orange and fans stop. Disconnect the power
cord from the power outlet.
• To turn off the power ring tone, see "Turning off the
Power on/off ring tone" on page 39 for details.
• If the projector is not properly shut down, to protect the
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press Power
again to start the projector after the fans stop and the
POWER indicator light turns orange.