BenQ MP776 ST Projector User Manual


 
Operation46
Note that the menu items are available when the projector detects at least one valid signal. If
there is no equipment connected to the projector or no signal detected, limited menu items
are accessible.
The default values listed in this manual, especially on pages 47-52, are for reference only.
They may vary between the projectors due to the continuous improvement to the products.
Main menu Sub-menu Options
5.
SYSTEM
SETUP:
Advanced
Closed Caption
Closed Caption
Enable
On/Off
Caption Version CC1/CC2/CC3/CC4
Lan Control
Settings
Control By RJ45/RS232
DHCP On/Off
Projector IP
Address
Subnet Mask
Default Gateway
DNS Server
Apply
Reset All Settings
6.
INFORMATION
FAQ-Image and Installation
FAQ-Features and Service
Current System Status
Source
Picture Mode
Resolution
Color System
Equivalent Lamp Hour
Firmware Version