BenQ MP776 ST Projector User Manual


 
Operation 33
6. Press
to select a menu item to be changed and adjust the value with /
//
/. See
"Fine-tuning the image quality in user modes" below for details.
7. When all settings have been done, highlight Save Settings
Save SettingsSave Settings
Save Settings and press Mode/Enter
Mode/EnterMode/Enter
Mode/Enter to
store the settings.
8. The confirmation message “Setting Saved
Setting SavedSetting Saved
Setting Saved” displays.
Fine-tuning the image quality in user modes
Fine-tuning the image quality in user modesFine-tuning the image quality in user modes
Fine-tuning the image quality in user modes
According to the detected signal type, there are some user-definable functions available
when User 1
User 1User 1
User 1 or User 2
User 2User 2
User 2 is selected. Based on your needs, you can make adjustments to these
functions by highlighting them and pressing / on the projector or remote control.
Adjusting
Adjusting Adjusting
Adjusting Brightness
BrightnessBrightness
Brightness
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting
Adjusting Adjusting
Adjusting Contrast
ContrastContrast
Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting
Adjusting Adjusting
Adjusting Color
ColorColor
Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.
Adjusting
Adjusting Adjusting
Adjusting Tint
TintTint
Tint
The higher the value, the more reddish the picture becomes. The lower the value, the more
greenish the picture becomes.
Adjusting
Adjusting Adjusting
Adjusting Sharpness
SharpnessSharpness
Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.
+50
+30
+70
+50
+30
+70