Filter
Top Products
ET10000A Physical Description
ETEP Installation Guide 19
Rear Panel
The ET10000A rear panel is shown in Figure 13.
Figure 13 ET10000A Rear Panel
Gigabit link status (green)
a
Off Loss of signal on the Gigabit link.
On The Gigabit link is up but no traffic is passing over the
interface link.
Blinking Indicates the presence of traffic on the Gigabit link.
Power supply status Off Power supply is not operational. Possible causes include
power supply unplugged, power supply removed from
chassis, or a malfunction.
On Power supply is operational.
a. Gigabit links include the remote and local data ports, gigabit Ethernet management port, and Aux1 port.
Elements of Figure 13:
1) Fans
Power Supply # 2
2) Power supply 2 receptacle
4) Release lever for power supply 2
5) Status LED for power supply 2. Green indicates normal operation. Red indicates a
power fail state.
Power Supply # 1
3) Power supply 1 receptacle
6) Release lever for power supply 1
7) Status LED for power supply 1. Green indicates normal operation. Red indicates a
power fail state.
Table 4 ET10000A Front Panel LED Indicators
Indicator Light State Indication