Black Box EncrypTight Enforcement Point (ETEP) Network Hardware User Manual


 
Installing the ET1000A
ETEP Installation Guide 41
The steps to perform for a typical installation are listed below.
Cabling Requirements: ET1000A
Table 17 outlines the standard cables used with each port on the ET1000A. The connector type listed
indicates only what is required to connect to the ET1000A port, and may or may not be the same
connector type required for the other end of the cable. Some cables are supplied by Black Box and others
are user-supplied.
Table 16 ET1000A Installation Steps
Step Action to Perform Description
1 Review the cabling requirements. on page 41
1 Unpack the shipping package. on page 42
2 Prepare a space for installation of the ET1000A. on page 42
3 Connect the cables. on page 44
4 Apply power to the ET1000A. on page 45
Table 17 ET1000A Standard Cables
ET1000A Port Cabling Supplied by...
Power receptacles Power supply cables certified
and approved for use in the
country of interest
Black Box
RS-232 Port Shielded copper null modem
cable, RS-232 DB9 connector
(female to male)
Black Box
Ethernet Management Port
(RJ-45)
Shielded Category 5 straight
through cable (STP), RJ-45
connector
a
a. The 10/100 Ethernet management port is auto-sensing for polarity. You can use a shielded Category 5 straight
through cable or a shielded crossover cable when connecting to this port.
Black Box
Ethernet Management port
(SFP)
Not applicable. Port is not
enabled in this release.
Not applicable
Local and Remote Gigabit
Ethernet ports
Optical SFP transceivers
1000Base-LX SFPs
9/125m single-mode duplex
fiber or simplex fiber pair (1
transmit, 1 receive), 1310 nm
nominal wavelength, LC
connector
OR
1000Base-SX SFPs
62.5/125m multi-mode
duplex fiber or simplex fiber
pair (1 transmit, 1 receive),
850nm nominal wavelength,
LC connector
Available as accessory options
Local and Remote Gigabit
Ethernet ports
Copper SFP transceivers
Shielded Category 5 straight
through cable (STP), RJ-45
connector
Available as accessory options
Aux1 port (SFP) Not applicable. Port is not
enabled in this release.
Not applicable