Filter
Top Products
Environmental and Regulatory Information
80 ETEP Installation Guide
European Notice
Products with the CE Marking comply with both the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
ET0100A Cabling
WARNING
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
ET1000A Regulatory Information
The ET1000A, part number 410-032-102, have received statements of compliance for the items listed in
the following sections:
• Application of Regulations: FCC Title 47, Part 15, Subpart B (US), Canada Standard ICES-003,
European Council Directive 2004/108/EC
• Class of Equipment: Class A
Safety
• UL 60950-1, 2nd Edition, 2007-03-27
• CSA-C22.2 No. 60950-1-07, 2nd Edition, 2007-03
Immunity
• EN 55024:1998/A1:2001/A2:2003 (IEC 61000-4-2:1995/A2:2000, IEC 61000-4-3:2002, IEC 61000-4-
4:2004, IEC 61000-4-5:1995/A1:2000, IEC 61000-4-6:1996/A1:2000, IEC 61000-4-8:1993/A1:2000,
IEC 61000-4-11:1994/A1:2000)
Emissions
• EN55022: 2006/A1:2007 Class A
• EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005
• AS/NZS CISPR 22:2006 Class A
FCC Information (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of FCC rules. Operations are subject to the following conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesirable
operation.