Black Box SCSI-2 LVD Network Card User Manual


 
9
CHAPTER 1: Specifications
1. Specifications
System Hardware
Required — IBM PC compatible computer with at least one available
PCI slot
Host Bus — PCI 2.1
Host Interface — 32-bit, 33-Mhz busmaster DMA
Host Data Rate — Data transfer at burst rates up to 133 MB/second
Port Used — None (does not occupy any COM or LPT port)
Other Hardware
Resources Used—Plug-and-Play compatible; automatically self-configures
interrupt, I/O address, BIOS address, etc.
Cable
Required — High-quality double-shielded
Compliance — CE (EN 50081-1, 50082-1); FCC Class B, IC Class/classe B
Device
Interface — Both internal and external: Ultra2 Wide SCSI (LVD/SE);
backward-compatible with Ultra2 Narrow SCSI and Wide
and Narrow single-ended Ultra SCSI, SCSI-3, SCSI-2, and
SCSI-1
Data Rate — Up to 80 megabytes per second in Ultra2 Wide mode;
Up to 40 megabytes per second in Ultra Wide mode;
Up to 20 megabytes per second in Fast Wide mode
Maximum
Distance — See Section 3.3
User Controls — (1) Board-mounted jumper for forcing termination;
Firmware configuration utility;
Driver software