Filter
Top Products
22
ULTRA2 LVD SCSI HOST ADAPTER
6. Holding the SCSI Host Adapter by the mounting bracket and card edge, with
it oriented so that the external connectors are facing the right way, insert the
Adapter in the PCI slot. Press it down firmly so the contacts are securely
seated in the slot. See Figure 4-1 on the next page.
CAUTION!
Though the PCI connector is keyed to prevent cards like the Adapter
from being inserted incorrectly, it is possible to damage the Adapter by
forcing it into other types of connectors.
Figure 4-1. Inserting the Adapter in a PCI slot.
7. When the Adapter is firmly seated, secure its metal bracket to the PC’s chassis
with the screw you removed in step 3.
8. (Optional) Most computers have one or more hard-drive-activity LEDs on
their front panel. If you want to, you can use your own cabling (because we do
not include cables for this purpose) to attach one of these indicators to the
Adapter’s four-pin LED connector, J3 (see Figure 3-2 on page 19 and
Figure 4-2 on the next page). Once you do so, the LED will light whenever
there is activity involving the attached Adapter anywhere on the SCSI bus.