Filter
Top Products
54
ULTRA2 LVD SCSI HOST ADAPTER
5.3.3 U
PDATING THE
W
INDOWS
98 D
RIVER
Take these steps to update the driver if you have an older version of it installed in
your Windows 98 system:
1. Once a Windows 98 session is established, start from the desktop and use your
installed mouse or the appropriate keystrokes to select these items one after
the other (each item contains the next in sequence): “My Computer,”
“Control Panel,” “System,” “Device Manager” tab, “SCSI Controllers” category,
“Initio INI-A100U2W PCI SCSI Controller.”
2. In the “IN-A100U2W SCSI Controller Properties” window, select the “Driver”
tab, then select “Update Driver...”
3. Select “SCSI Controller” from the list of available devices, then select “Have
Disk...”.
4. Insert Driver Disk 1 into drive A:, then click “Next.”
5. An “Install from Disk” window will appear. Insert Driver Disk 1 into drive A:,
then enter the pathname of the Windows 98 driver’s directory (“A:\WIN95”)
and select “OK.”
6. Select “Initio INI-A100U2W PCI SCSI Controller”, then select “OK” to install
the INIA100.INF driver on your hard disk drive. (Because of a Windows quirk,
the A:\WIN95 directory might become deselected; it might be necessary to
direct Windows back to A:\WIN95—possibly several times—before it actually
copies the driver.)
7. This completes updating the
Ultra2 LVD SCSI Host Adapter
’s device driver.
Reboot the system to activate the updated driver.
8. We highly recommend that you verify that the new version of the device
driver has been properly installed by starting at the desktop and selecting
these items one after the other (each item contains the next in sequence):
“My Computer,” “Control Panel,” “System,” “Device Manager” tab, “SCSI
Controllers” category, “Initio INI-A100U2W PCI SCSI Controller.” If “This
device is working properly” is displayed on your screen, the driver has been
correctly installed.