Filter
Top Products
30
ULTRA2 LVD SCSI HOST ADAPTER
Figure 4-6. Simple multiple-initiator system.
4.6 The Setup Utility
4.6.1 T
HE
B
OOT
O
PTIONS
, S
ELECT
C
HANNEL
M
ENU
,
AND
M
AIN
M
ENU
Among the Ultra2 LVD SCSI Host Adapter’s built-in firmware programs is a menu-
driven SCSI
Setup Utility, with which you can change the Adapter’s settings without
opening the
computer or handling the Adapter’s circuit board. (Note that the
Adapter’s default settings are appropriate for most PCI systems, so odds are you
won’t need to run the Utility.) To start the Utility, first make sure that all of the
devices attached to the SCSI bus are powered up when the host computer system is
turned ON. Then reboot the PC the Adapter is installed in and wait for this
prompt to appear (it will be preceded by version and copyright info):
!!! Press < Ctrl > < I > for SmartSCSI Setup Utility !!!
!!! Press < Ctrl > < B > to boot from SCSI CD-ROM !!!
!!! Press < ESC > to continue !!!
LANs for client access and
cluster communication
Shared
I/O Bus
Shared
CD-ROMS
Shared
I/O Bus
Database Server
with Adapter
installed
Apps Server
with Adapter
installed