Filter
Top Products
95 Chapter 16
16
Setting Up and Using PC FAX
(For Windows
®
Only)
Introduction
This chapter outlines the basics of the Brother software, so you can get started using the Multi-
Function Link
®
Pro Suite software. Detailed installation and setup instructions are in the On-Line
Documentation section of the Brother CD-ROM that is included with the machine.
Multi-Function Link
®
Pro Suite software for the machine includes ScanSoft
™
PaperPort
®
for
Brother and ScanSoft
™
TextBridge
®
. (See Using ScanSoft™ PaperPort® for Brother and
ScanSoft™ TextBridge®, page 89.)
Brother Resource Manager
The Brother Resource Manager application must be running for you to use the machine with your
Windows
®
computer. Multi-Function Link
®
Pro Suite software and the MFL Pro Suite Printer
Driver automatically load the Resource Manager, as needed. The Resource Manager allows the
single bi-directional Parallel port on the machine to simulate a Communications port for faxing and
scanning and to simulate a Parallel port for Windows
®
GDI printing.
MFC Remote Setup
The MFC Remote Setup application allows you to quickly set up the machine by taking advantage
of the ease and speed of programming on your PC. When you access this application, the settings on
the machine will be downloaded automatically to your PC and displayed on your computer screen.
If you change the settings, you can upload them directly to the machine.
OK
This starts the process of uploading the data to the machine and exiting the remote setup program.
If an error message is displayed enter the correct data again, then click OK.
Cancel
This exits the remote setup application without uploading the data to the machine.