Filter
Top Products
Setup 12
BASIC FAX USE
Custom Settings
Volume Settings
Ring Volume
You can select how loud the machine rings. The ring volume can be turned off for silent reception
if required.
1
Press Menu/Set, 1, 3, 1.
2
Press or to select OFF, LOW, MED, or HIGH.
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
You can adjust the ring volume when the machine is idle. You can turn the ring OFF.
Press or to adjust the volume level. With each key press, the machine rings so you can hear
the current setting and the display shows the setting you are choosing. Each key press changes the
volume to the next setting.
The new setting will remain until you change it again.
Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes with this volume set to LOW.
When the beeper is set to LOW or HIGH, the machine beeps every time you press a key or make
an error, and at the end of sending or receiving a fax.
1
Press Menu/Set, 1, 3, 2.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Menu/Set.
4
Press Stop/Exit.
Speaker Volume
You can set the volume of the machine speaker.
1
Press Menu/Set, 1, 3, 3.
2
Press or to select your volume setting (OFF, LOW, MED, or HIGH).
3
Press Menu/Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
If you are using Hook, you can adjust the speaker volume while dialing. You can turn the speaker
off or you can select a speaker volume level. The default setting is the lowest volume.
Press or to adjust the volume level. The display shows the setting you are choosing.
Each key press changes the volume to the next setting. The new setting will remain until you change
it again. Press Hook to disconnect the line.