Filter
Top Products
Sending a Fax 18
BASIC FAX USE
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause and Fax Start to try
again. Anytime you want to make a second call to the last number dialled, press Redial/Pause and
Fax Start to save time.
If you’re sending a fax automatically and the line is busy, the machine will automatically redial up
to 2 times at 2 minute intervals for Australia or up to 2 times at 3 minute intervals for New Zealand
(10 times in 3 minute intervals for some countries).
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
Sending Operation
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset, or press Hook to listen for a dial tone.
1
Insert the document face down in the ADF.
2
Enter the fax number using One Touch (FAX-2850), Speed Dial, Search or the dial pad.
3
Press Fax Start.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending a fax.
1
Insert the document face down in the ADF.
2
Pick up the handset and listen for a dial tone—OR—press Hook and listen for a dial tone.
3
Enter the fax number you want to call. (You can dial the number by using One Touch, Speed
Dial, Search or dial pad.) (See Dialling a Number, page 16.)
4
When you hear the fax tone, press Fax Start.
5
Replace the handset.
When you press Redial/Pause, a dash “-” will appear on the display. By storing a
pause, you can create a delay of
3.5
seconds.