Brother 2850 All in One Printer User Manual


 
BASIC FAX USE
Sending a Fax 16
2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document. This setting is a temporary
setting.
1
Insert the document face down in the ADF.
2
Press Menu/Set, 2, 2, 1.
3
Use or to select AUTO, LIGHT, or DARK.
4
When the screen displays your selection, press Menu/Set.
5
Press 2 if you have finished choosing settings, and go to Step 6ORPress 1 if you want to
select additional settings. The display returns to Setup Send menu.
6
Enter a fax number and press Fax Start.
Fax Resolution
When you have a document in the ADF, you can use the Fax Resolution key to temporarily
change the setting. Press Fax Resolution repeatedly until the LCD shows the setting you want.
OR
You can change the default setting.
1
Press Menu/Set, 2, 2, 2.
2
Press or to select the resolution you want, and then press Menu/Set.
3
Press Stop/Exit.
Dialling a Number
One Touch Dialling (For FAX-2850 Only)
1
Insert the document face down in the ADF.
2
Press the One Touch key of the location you want to call.
3
Press Fax Start.
STANDARD: Suitable for most typed documents.
FINE: Good for small print; transmits a little slower than Standard resolution.
S.FINE: Good for small print or artwork; transmits slower than Fine resolution.
PHOTO: Use when document has varying shades of grey; slow transmission time.
If you try to use a One Touch or Speed Dial location with no number stored in it,
you hear a warning sound, and screen displays NOT ASSIGNED. The display
returns to normal after 2 seconds.