Filter
Top Products
1 - 4 UNIX PRINTING
3
Configure the
/etc/printcap
file on each host computer to
specify the local print queue, the Print/Fax server name (also
called remote machine or rm), and the Print/Fax server service
name (also called remote printer, remote queue, or rp), and the
spool directory.
An example of a typical printcap file:
laser1|Printer on Floor 1:\
:lp=:\
:rm=BRN_310107:\
:rp=TEXT_P1:\
:sd=/usr/spool/lpd/laser1:
This step applies to the majority of UNIX systems, including
Linux, Sun OS (but not Solaris 2.xx), Silicon Graphics (lpr/lpd
option required), DEC ULTRIX, DEC OSF/1, and Digital
UNIX. SCO UNIX users should follow these steps, but should
also see
SCO UNIX Configuration on page 1-10 section. Users
of RS/6000 AIX, HP-UX, Sun Solaris 2.xx, and other systems
that do not use the printcap file should skip to Step 4. SCO
user's should also skip to Step 4 (SCO uses the printcap file,
but this file is automatically configured via the
rlpconf
command).
Make sure this information is added to the end of the printcap
file. Also make sure that the last character in the printcap file
is a colon “:”.
This will create a queue named laser1 on the host computer
that communicates to a Brother print server with a node
name (rm) of BRN_310107 and a service name (rp) of
TEXT_P1 printing text files to a Brother printer through spool
directory
/usr/spool/lpd/laser1
. If you are printing
binary graphics files, you would use the service BINARY_P1
instead of TEXT_P1.