Filter
Top Products
DLC PRINTING 8 - 2
3
Select
DLC Protocol
and then
OK
or
Add
if using Windows
®
2000. You may be asked for the location of the files. For Intel
based computers, the necessary files are stored in the i386
directory of the Windows NT
®
4.0 CD-ROM. If you have a non-
Intel platform, specify the correct directory on your Windows
NT
®
4.0 CD-ROM and close the windows.
4
Reboot your system to make the change take effect. Windows
®
2000 should not require a re-boot.
Windows
®
2000 Printer Setup
1
Log into Windows
®
2000 with administrative privileges. From
the
Start
menu, select
Settings
and then
Printers
.
2
Select
Add Printer
(If you have already installed a Brother
printer driver, double click the printer driver that you wish to
configure and then select
Printers/Properties
, select the
Ports
tab, click on
Add Port
and continue from Step 6 (ignoring
steps 11-14 about installing the correct driver)).
3
Click
Next
.
4
Select
Local Printer
and make sure that
Automatically detect
and install my Plug and Play printer
is not checked.
5
Click
Next
.
6
Select the
Create a new port:
option and highlight
Hewlett-
Packard Network Port
.
7
Click
Next
.
8
A list of available Print/Fax server MAC addresses (Ethernet
addresses) appears in the larger box under
Card Address
.
Select the address of the desired Print/Fax server (you can see
the Ethernet address on the configuration page).
You can find the node name and MAC address by printing
out the configuration page. For information on how to print
the configuration page on your Print/Fax server, see
Resetting the Print/Fax Sever back to factory settings (Test
Switch) on page 13-4.