Filter
Top Products
6 - 6 NOVELL NETWARE PRINTING
5
Select
None
for the printer Type, and
Novell Port Handler
for
the Port Handler Type. Then click
OK
.
6
You must now specify the type of connection that you are going
to use. There are four possible options. Select the
LPR over IP
option.
7
Enter the relevant details of the printer and Brother
recommends typing
Binary_P1
for the printer name. Click
finish
and wait. Select the printer drivers for the client operating
systems.
You are now ready to print.
Configuring NetWare 3 and NetWare 4 systems
Brother's BRAdmin Professional utility provides similar functionality
to the NetWare PCONSOLE utility (or the NWADMIN utility in
NetWare 4.1x or later). To use the BRAdmin Professional utility to
create a Brother Print server under NetWare, make sure that you are
logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN
(NetWare 4.1x or later) and perform the appropriate steps as detailed
in the following pages.
Creating a Network Print Server (Bindery Queue
Server) using BRAdmin Professional utility
1
Make sure that you logged in as SUPERVISOR (NetWare 2.xx
or 3.xx) or ADMIN (NetWare 4.xx or later).
2
Start BRAdmin Professional utility.
You must install the Novell NetWare Client 32 if you wish to
create queue information on your NetWare servers by
BRAdmin Professional utility.