Filter
Top Products
1 - 8 UNIX PRINTING
Earlier versions of HP-UX use similar procedures to 10.xx users:
1
Enter sam and select
Peripheral Devices
and then
Add
Remote Printer (not Networked printer)
.
2
Enter the following remote printer settings (the other settings do
not matter):
■
Line printer name
(user-selectable).
■
Remote system name
(the Print/Fax server name; must
match what is in hosts file or use Print/Fax server IP
address).
■
Remote printer queue
(Print server binary or text service
name, e.g. BINARY_P1 or TEXT_P1).
■
Remote Printer is on a BSD System
(Yes).
IBM RS/6000 AIX Configuration
The RS/6000 AIX operating system uses the smit program to set up
the remote printer. The procedure is as follows for AIX 4.0 and later:
1
Enter smit and select
devices
.
2
Select
Printer/Plotter
.
3
Select
Print Spooling
.
4
Select
Add a Print Queue
.
5
Select
Remote
.
6
Enter the following Remote Printer Settings:
Name of queue
(user selectable)
Host name of Remote Printer
(Print/Fax server name; must
match name in
/etc/hosts
file or use the print server IP
address)
Name of queue on remote printer
(Print/Fax server binary or
text service name, eg. BINARY_P1 or TEXT_P1).
Type of print spooler
. BSD (press the LIST button and choose
BSD)