Filter
Top Products
UNIX PRINTING 1 - 11
SCO UNIX requires TCP/IP V1.2 or later to work with Brother print
servers. You must first configure the
/etc/hosts
and
/etc/
printcap
files as described in step 2. Then run the sysadmsh
program as follows:
1
Select
Printers
.
2
Select
Configure
.
3
Select
Add
.
4
Enter the name of the print queue you entered in the
/etc/
printcap
file as the Printer name.
5
Enter anything as the
Comment
, and
Class name
.
6
For the
Use printer interface
select
Existing
.
7
Press the F3 key to get a list of available interfaces, and select
the desired one as the
Name of interface
using the cursor keys
(
Dumb
is a good choice).
8
Select
Direct
as the
Connection
.
9
Enter the desired Device name (
/dev/lp
generally works).
10
Select
Hardwired
as the
Device
.
11
Select
No
for the
Require banner
field.
Older SCO Unix Systems
The Brother NC-9100h Print/Fax servers support the FTP protocol.
Earlier SCO Unix systems are often configured to print using the FTP
protocol.
IBM AS/400
To use a Brother Print/Fax server with an IBM AS/400 running IBM's
TCP/IP gateways services for OS/400 (the OS/400 system must be
v3.1 or later)
Use the CFGTCP command at your OS/400 prompt to add the Print/
Fax server's TCP/IP address to the AS/400 host table.