Filter
Top Products
NETBIOS PEER TO PEER PRINTING 4 - 4
NetBIOS Port Monitor for Windows
®
95/98/Me/
2000/XP and Windows
NT
®
4.0
This software requires the TCP/IP transport protocols to be installed
on your Windows
®
95/98/Me/2000/XP and Windows
NT
®
4.0
computer. To install those protocols refer to your Windows
®
documentation.
If you are using the TCP/IP protocol, the proper IP address should
be defined on both the Brother Print/Fax server and your client PC.
Installing the Brother NetBIOS Port Monitor
1
Start the CD-ROM installation menu program according to the
Quick Setup guide.
2
Select the proper model and then the
Software Installation
menu. Then select the
Network Print Software
menu to start
the
Brother Network Print Software
installation program.
3
Push the
Next
button in response to the Welcome message.
4
Select
Brother Peer to Peer Print (NetBIOS)
installation
5
Select the desired directory to install the
Brother Peer to Peer
Print (NetBIOS)
files and push
Next
.
6
Enter the port name that you wish to use. The port name must
start with “BNT”. For example BNT1. Whichever name you
choose, it must be unique. Then press
OK
. The name must be
unique on your PC, however other computers can use the same
port name as the name you specify on your PC.
If you already installed the driver from the printers CD-ROM
Installer and you selected “Brother Peer to Peer Network
Printer” during the installation then you do not need to install
the Brother Network Print Software again.