Filter
Top Products
4 - 5 NETBIOS PEER TO PEER PRINTING
7
You must now enter the server name and port name for the
actual Print/Fax server. You can use the
Browse
button to
search for the Print/Fax server, select the domain/workgroup
name, and then the server is listed. If the print server does not
automatically appear in your browse list, then you must ensure
that the domain name is configured correctly. Otherwise you
must enter the name manually. The name should be compliant
with UNC (Universal Name Convention). For example:
\\NodeName\ServiceName
.
Where NodeName is the NetBIOS name of the Brother Print/
Fax server (the default name is usually
BRN_xxxxxx
, where
xxxxxx
is the last six digits of the Ethernet address), and
ServiceName
is the service name for NetBIOS of the Print/
Fax server. By default it is BINARY_P1. For example:
\\BRN_310107\BINARY_P1
8
Then press
OK
.
9
Click the
Finish
button. You must now restart your computer
before you can continue.
Associating the Printer
1
You must now create a printer on your Windows
®
95/98/Me
/
2000/XP and Windows NT
®
4.0 systems using the standard
Windows
®
printer setup procedure. To do this, go the
Start
button, select
Setting
and then
Printers
.
Windows
®
95/98/Me
2
Select
Add Printer
to begin the printer installation.
3
Click
Next
when you get the
Add Printer Wizard
window.
You can find the NetBIOS name and MAC address by
printing out the printer configuration page. see Resetting the
Print/Fax Sever back to factory settings (Test Switch) on
page 13-4 for information on how to print the configuration
page on your Print/Fax server.