Filter
Top Products
SmartCell 6A000 User Guide 4-31
Switch Administration Saving Core Dumps
Enter the set CoreDump command to enable the core dump feature. For example,
SmartCell ZX # set coredump
EnableCoreDump(n) : y
< “y” to enable core dump feature
ServerIP() : 204.95.77.240
< IP address of my TFTP server
CoreDumpFile() : /tftpboot/bobr/core
< full path name for core dump files
userName() : bobr
< login name on the server
UserPassword() :
< password
SmartCell ZX #
Note The set CoreDump command uses FTP to create the
core_cpu
and
core_cmn
files. If your server does not run FTP, create these files manually. Then execute the
set CoreDump command.
Note On UNIX systems, make sure that the permissions are set correctly so that data
can be written.
Note For security, the set CoreDump command retains your password only long enough
to create the core dump files. Your password is then dropped from system
memory.
To see the current core dump configuration, enter the
show coredump command.
SmartCell ZX # show coredump
Core Dump Enabled : Yes
Core Dump Server IP : 204.95.77.240
Core Dump File : /tftpboot/bobr/core
SmartCell ZX #