Filter
Top Products
Chapter 5: Local Management
5-96 6H128-08 and 6H129-08 User’s Guide
5.28.2 Using the Clear Counters Command
To reset all the statistics counters of the selected interface to zero, perform
the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER, the counters for the selected index are reset to zero.
5.29 NETWORK TOOLS
The Network Tools function resides on the 6H12X-08 and allows the user
to access and manage network devices.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Module Menu screen, and press
ENTER. The Network Tools screen displays. See Figure 5-35.
Figure 5-35 Network Tools Help Screen
TIP
Type help at the prompt to list all the commands that are
available for the module in the current operational mode. See
Figure 5-35. A command used incorrectly (wrong syntax), will
prompt a display of the correct usage. Use lower case when
entering commands in Network Tools.
-> help
Commands Available to the User:
Built in commands:
090829
For help with a specific command, type 'help <command>'.
arp
netstat
show traceroute
defroute
ping
reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
->
Welcome to Network Tools
soft_reset telnet link_trap