Filter
Top Products
Chassis Configuration Screen
6H128-08 and 6H129-08 User’s Guide 5-21
3. Press ENTER. If the subnet mask is valid, the cursor returns to the
beginning of the Subnet Mask field. If the entry is not valid, the Event
Message Line displays “INVALID SUBNET MASK OR FORMAT
ENTERED”. Local Management does not alter the current value, but
it does refresh the Subnet Mask field with the previous value.
4. Use the arrow keys to highlight the SAVE command, then press
ENTER. The Event Message Line at the top of the screen displays
“SAVED OK”, and the changes are saved to memory.
5.7.3 Setting the Chassis Date
The 6C105 is year 2000 compliant. This allows the date to be set beyond
the year 1999. To set the chassis date, perform the following steps:
1. Use the arrow keys to highlight the Chassis Date field.
2. Enter the date using this format: MM/DD/YYYY.
3. Press ENTER to set the system calendar to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays “SAVED OK”. If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Chassis Date field with the previous value.
NOTE
It is not necessary to add separators between month, day, and
year numbers. For example, to set the date to 03/17/1997, type
“03171997” in the Chassis Date field.
NOTE
Upon saving the new chassis date, all interface modules
installed in the chassis recognize the new value as the current
date.