Filter
Top Products
Chapter 5: Local Management
5-24 6H128-08 and 6H129-08 User’s Guide
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER. The warning screen in Figure 5-10
displays:
Figure 5-10 Operational Mode Warning Screen
4. Use the arrow keys to highlight the YES command and press ENTER.
The changes are saved, and all the modules installed in the chassis
reboot.
NOTE
If the 6H12X-08 have been set to 802.1Q SWITCHING, refer to
your
Port Based VLAN User’s Guide
to configure the devices
for this type of operation.
The Operational Mode field in the Chassis Configuration
screen does not support the SECURE FAST VLAN operational
mode. For the modules to function as SecureFast switches,
they must have a unique IP addresses, and be configured to
act as standalone devices in terms of Local Management via
the 6C105 chassis. Section 5.15.9 provides additional
instructions that must be performed before configuring the
modules as SecureFast switches.
WARNING!
1666
YOU HAVE ELECTED TO SAVE THE OPERATIONAL MODE FOR
THE WHOLE CHASSIS. THIS WILL CAUSE ALL OF THE
BOARDS IN THE CHASSIS TO REBOOT.
ARE YOU SURE YOU WANT TO SAVE THE NEW OPERATIONAL MODE
Event Message Line
NOYES