Filter
Top Products
General Configuration Screen
6H128-08 and 6H129-08 User’s Guide 5-53
Figure 5-20 COM Port Warning Screen
3. Use the arrow keys to highlight YES. Press ENTER.
!
CAUTION
If the COM port is reconfigured without a valid IP address set
on the module or chassis, the message shown in Figure 5-20
displays. Do not continue unless the outcome of the action is
fully understood.
NOTE
If the 6C105 chassis has been configured with a valid IP
address this screen will not appear. When the chassis is
assigned a valid IP address all the interface modules installed
share this same address.
If you do not get this screen, go to Step 4.
WARNING
174252
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS BOARD. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
YES
NO