Filter
Top Products
Customizing OMEGAMON II 57
Using the Callable Interface
Using the Callable Interface
The callable interface feature of OMEGAMON II for DB2, Version 500, lets you make
direct calls to the.EXP command on the OMEGAMON II commands panel without having
to first access TSO. Before using this feature, you should do the following:
1. Customize the Classic started task.
2. Set up
!DB/EXPLAIN
3. Set up the CUA options.
4. Set up the
!DB/EXPLAIN options.
Customizing the Classic Started Task to Implement the OMEGAMON II for DB2
Interface
Use the following procedure to customize the Classic started task.
Step Action
1 From the Define OMEGAMON II for DB2 Configuration Values menu, select option 1,
Realtime monitor interfaces.
Result: The Started Task and VTAM Information panel is displayed.
2 Press Enter.
Result: The OMEGAMON II for DB2 - Classic Interface - DB/EXPLAIN panel is
displayed.
3 Specify the appropriate information on the Classic Interface - DB/EXPLAIN panel and
press Enter.
Result: The system returns you to the Define OMEGAMON II for DB2 Configuration
Values menu.
4 Press the End function key.
Result: The system displays the Configure OMEGAMON II for DB2 menu.
5 From the Configure OMEGAMON II for DB2 menu, select option 3, Create runtime
members.
Result: The system displays the Install OMEGAMON II for DB2 Members menu.
--- DEFINE OMEGAMON II FOR DB2 CONFIGURATION VALUES /RTE RTE01---
OPTION ===>
Select the following options to configure OMEGAMON II for DB2.
1 Realtime monitor interfaces
2 DB2 specification/selection
F1=Help F3=End