Filter
Top Products
Using the IFCID Trace Facility
86 OMEGAMON II for DB2 User’s Guide: CUA Interface, Version 540
At the point when you enter option S to select the IFCIDs (whether by trace type, trace
class, or IFCID record) and to start the IFCID trace, OMEGAMON II for DB2 asks you to
confirm your selection. If you choose to alter your selection, you can enter option R (reset
selection). OMEGAMON II for DB2 then allows you to re-enter your selections.
Displaying IFCID Trace Data
To display the result of an IFCID trace, follow these steps:
■
enter option T (Tools) to display the Tools pull-down menu.
■
enter option 3 (IFCID Trace Facility) to display the IFCID Trace pull-down menu.
■
enter option 2 (Display IFCID Trace Counts) to view the Display IFCID Trace
Collection panel.
The Display IFCID Trace Collection panel provides the following fields:
The header information for each IFCID Trace record is 64 bytes in length. The following
table describes each field in the header information, in the sequence in which they
appear.
Field Description
DSN The user-specified dataset name provided when starting the IFCID trace.
Trace Records
Lost
The number of trace records that could not be written to the dataset.
Status= The status of the IFCID trace facility. The status is either active or inactive.
Start time The timestamp when the IFCID trace started.
Run time The amount of time that the IFCID trace has been active.
ID The identification number associated with each IFCID record. The leading
zeroes are omitted.
Count The number of times the event or action associated with an IFCID record
took place.
Size The total amount of collected IFCID data in bytes.
Description A brief description of the IFCID record’s contents.
Field Length (in bytes)
Record length 2 (hexadecimal)
QSAM fill characters 2 (hexadecimal)
Plan name 8 (character)
Date and time (in the form YYYYMMDDHHMMSSHH) 8 (hexadecimal)
Secondary authid (or primary authid) 8 (character)
Original authid 8 (character)