Filter
Top Products
Setting Up Memory Boxes
5-71
5
Customizing Fax Settings
NOTE
•
If you make a mistake when entering the subaddress/password, press (Clear)
➞
enter the correct subaddress and password.
•
If you want to cancel storing the subaddress/password, press [Cancel].
10
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Relay Memory Box
A Relay Memory Box enables you to forward received documents to a number of
specified destinations at a specified time, using the machine as a relay unit.
You can set the Relay Start Time, and relay all of the documents stored in the
memory box at the same time. (See "Memory Boxes," on p. 3-5.)
You can specify the following items for the Relay Memory Box.
*1
Indicates the default setting.
Item Description Setting
Memory Box Name Sets the memory box name.
Relay
*1
24 characters
maximum
Password
Sets a password to control the memory box.
It is necessary to enter the password to
change the contents of the memory box, or to
print documents received in the memory box.
Not required
A one to seven digit
number
Subaddress
Sets an ITU-T standard subaddress. A
subaddress is required to distinguish a Relay
Memory Box from other memory boxes.
Required
Numbers, #, *, and
spaces can be used
(up to 20 digits).
RX Password
Sets an ITU-T standard password. If a
password has been set, the password added
to the received documents is compared with
the set password. If the passwords do not
match, the documents are not received.
Not required
Numbers, #, *, and
spaces can be used
(up to 20 digits).
Relay Sending
Destination
Sets the destination to which the received
documents in the memory box are sent.
Specify the
destination using the
Address Book or
Coded Speed Dialing.